Originally posted by hetfield:
I'm not sure if its different for a 2000, but on my '98 non-SVT, just pull fuses #4 and #11 for about 20 minutes or so. Then replace the fuses, start the engine, and drive around for a while.
Uh....no. Do this...you'll be much happier with the results: I don't remember it 100% off hand (It's in the Factory Service Manuals)
Basics are:
1. Start car
2. Let it idle to warm up (~5 minutes)
3. Take it for a leisurely drive at various rpms accelerating & decerating (3-5 minutes)
4. Get on the car hard at various rpms accelerating & decerating (3-5 minutes)
5. Stop the car & let it idle
6. Turn on the A/C (2 minutes or until idle settles down)
7. Repeat step 3 (A/C is cut off at WOT so step 4 in unnecessary)
8. Stop car and let idle a minute or so
9. Shut off
The PCM will continue to learn a little more over the next several driving cycles as well.
