I did. But no pics no digital camera. I replaced the stock unit with a manual transmission shifter nob. I fixed the problem with the detent button by putting a small screw in the side of the shifter stick that houses the plastic rod that pushes down to unlock the shifter. Then I got a white APC shifter boot and cut out all of the Park, Reverse, Drive indicator and made the boot mount to the plastic. It looks awesome(like a mtx)But if your not that mechanical checker auto,pep boys, etc..has an after market shift nob that takes the place of your original. The overdrive wires were taken car of by getting a switch and drilling a hole in the plastic where the switch would go and using it as the overdrive switch. Sorry for the long post but you asked and I thought that it would help somewhat to tell how I did mine.
