Some notes from the guy who had them first
You need to use the top hole at the rear or they are not strong enough to keep the Bonnet (soory Hood) up. We had a load of folks in the UK moaning that they would only just keep the hood up if you lifted it all the way. turns out they were all using the bottom hole. The top hole works and wont touch the bonnet if it is adjusted and levelled properly.
Also mine are beginning to rust after 6 months, so go and give yours a good soaking in WD-40 and wax them NOW! before its too late
Mad Mole
Visit
Mad Moles Mondeo Madness 2L Zetec, Cams, Stage 2 head, Valve work, Powerflow, Unichip, AEM Ram, K&N, Ecotek, 75mm Lower etc.
192 BHP, Faster than a speeding Duratec!
