Contour Enthusiasts Group Archives Forums General Dyno and Drag Good or Bad?

Here is a list of runs from my last track day, can someone tell me if they're good/bad/average. We brits don't do a lot of 1/4's so your info will be a great help.
btw, it's a 2001 Mondeo ST200, precats gutted, Blitz induction filter with CTA pipe, running on standard 17's.

Gary


Run.. 1/4 .. reaction .. 60' .. terminal
10 16.393 sec 0.373 sec 2.913 sec 90 mph
27 15.084 sec -0.045 sec 2.559 sec 97 mph
71 14.243 sec 1.399 sec 1.676 sec 95.7 mph
131 16.372 sec 1.001 sec 2.644 sec 87.7 mph
193 15.68 sec 0.251 sec 2.656 sec 93.4 mph
204 15.249 sec 0.019 sec 2.515 sec 92.2 mph
479 15.655 sec 0.209 sec 2.597 sec 92.4 mph
513 16.096 sec 0.416 sec 2.749 sec 89.8 mph
720 15.798 sec 0.232 sec 2.627 sec 90.9 mph
773 16.087 sec 0.13 sec 2.657 sec 89.3 mph

Well on run 71 I think you definitely put down your opponent's numbers.

They do not correlate at all with your other times/mph and a 1.6x 60 foot time will never happen!

The rest of the times look good if a bit sporadic.
The 60' times are not so hot, but the 17's likely have a little to do with that.

I tend to agree, run 71 is dodgy. These times were pasted from the raceway's website stats. My m8 in a ST24 also received a sub 15 with a 1.8 60'.
The thing is, the only car to beat me head to head was a pug 206 with god knows what under the hood! It must have been his time (71).
On this particular day, there was an ST220 there, his times were about the same as mine although his terminals were slower.
We have another day out on the 25th of this month, let's see if we can better these times.

Gary

Run 27 looks like what an SVT would run here (a little less on the MPH) The rest of the runs are what regular Contours run here. With a little practice you can get low 15 (if run #27 is yours) all the time. Good luck!

Yeh, 27 is deffo mine. It was our first time at the track, maybe better next time