Contour Enthusiasts Group Archives Forums Modifications Duratec Performance SVT/ST200 UIM & LIM install problems need help

If your 19# injectors are the "pencil" style from a returnless system then the connector is different from ours. I think airknight rewired his 95 harness to use that style connector on his 3.0 so it can be done. I used mustang injectors that had the same connector as ours so didn't have to do this.

For your email question - I just sliced off the nylon lines from the quick connects and the metal fuel line back by the wheel well and replaced it with goodyear fuel injection hose clamped down with rolled edge EFI hose clamps.

My fuel trim is more or less normal without any MAF or PCM tweaking - but I was running high positive trim before the swap, results will vary........