I copied this out of the Ford Service Manual....maybe it'll help.
1. With an assistant, raise rear sub-frame to body and loosely install four rear sub-frame to body retaining bolts.
2. Install Sub-frame Alignment Pin Set T94P-2100-AH into rear sub-frame and body alignment holes. After aligning the holes, slightly tighten the rear sub-frame-to-body bolts.
3. After rear sub-frame alignment is complete, tighten four rear sub-frame to body bolts to 102-138 N-m (75-101 lb-ft) and remove alignment tools.
4. Install the forward rear suspension arm and bushings and rearward rear suspension arm and bushings to the rear wheel spindles. Tighten the retaining bolts and nuts for the rear suspension arm and bushings to 70-98 N-m (52-72 lb-ft) and the retaining bolts for the rear suspension arm and bushings to 102-138 N-m (75-101 lb-ft).
5. Install the muffler and tailpipe assembly. Refer to «Section 09-00».
6. Install the rear tires and wheels. Refer to «Section 04-04».
7. Lower hoist.
8. Check rear end alignment. Adjust if necessary. Refer to «Section 04-00».
95 Contour Zetec, ATX (wrecked, sitting in the barn)
95 Mystique Zetec, MTX
2000 Taurus SEL 3.0L Duratec
1994 Crown Victoria LX 4.6 V8
1993 Chevy Silverado 4.3 V6
| 
