Originally posted by dennym:
Next weekend I'm going to change out the air filter element, PCV valve, fuel filter, and thermostat which are all overdue for replacement. I replaced the plugs with Motorcraft Platinum OEM's at 60,000 miles and I'm going to install new wires soon. I'm at 92,000 miles now. Does anyone have any other suggestions I might try?
Your list is fine, definitely should help. Don't forget to reset the ECU after doing all these.
You might want to clean the MAF as well (5 minute job, it improves rough idle). If you do all these yourself, please tell me how difficult it was to replace the PCV valve - I'm about to do it, and I know it's not an easy story on Zetecs.
Thanks,
Tiv
