Originally posted by lilbern:
Done. The hardest part was screwing the new fogs to the oem brackets while keeping those clips on. 
PITA
What did everyone use to hold the brackets to the bottom of the mounting plate? I used some plastic retaining clips like the ones that were on there. I might shoot some sheetmetal screws in there to hold it better.
Bernie
This is the hardest part, Slide a screw through the OEM bracket then through the piaa, screw the nut on the screw 3/4's of the way on, Make sure all your connections are together.
Look at page 4 detailed info. 
