Originally posted by jborge:
I had the same problems with both Contours. I was equally puzzeled becuase of how the lights operated. I thought there were major problems with some logic module some where.
It turned out to be bad contacts in the door switches in the doors. They are really cheap and rely on chassis ground of the car. Remove the switches and with knife or file clean up the contact area around the hole. There is a good chance that this is the problem. Good luck.
exactly! I had this problem a few weeks back with the driver's door, now the passenger side is acting up. Just take the switch off, lean it up (and the door as well) and reinstall. problem should disappear.
(here's a better question - why are these switches grounded to a PAINTED surface?
)
