I'm looking for advice on how to realign my driver's side foglamp on my 2000 Contour SVT. It was pushed out of alignment during a routine hand wash in my driveway. Now, the driver's side foglamp beam is about 6" higher than the passenger side one from about 6' away. When I'm about 4' from my closed garage door with the lights on, the difference in height is visually noticible. Plus, I've been flashed by a few oncoming vehicles on the road as the beam must be in their eyes. It is rocked back, leaving about a finger width's gap at the top between the ground effects/bezel and the actual lamp, while the passenger side one is perfectly flush with the plastic. Has anyone had to correct this problem or switched out the entire assembly? I know there's an access panel on the bottom of the car behind the lamp, but I haven't been able to remove the plastic plugs that hold it in and I don't want to tear or ruin anything. Is it easier to remove the headlamp and go in that way? Has anyone had any luck with this? Any advice would be much appreciated. Thanks!
svtillini
Black/Prairie Tan 2000 SVT Contour
