Originally posted by DemonSVT:
Sounds like a bad CV joint or possibly control arm bushings.
Stop driving it and start inspecting it already!
Well Demon, I took your advice and took the wheel off and did a visual inspection!!! The CV joint
LOOKS Ok no torn boots or any thing!!!!!
Also upon further inspection I found that it does make this noise on both left and right hand turns, even at low speeds. If I turn the wheel all the way to on side and drive in a circle at about 5mph it makes the Popping or clonking noise about every 4-5 seconds but it seems to be a lil louder on right hand turns.......
Any Ideas??????
Also Demon the control arm bushing, is that the same as the A arm?
