I check my out last night, it had been doing the same things, only after Ford did the wire harness replacment.
My fan at times would not run when the air was on, and would not cool inside. I could move the fan plug & it would start running & air would start cooling.
I pulled the fan harness resistor plug off the fan and looked at the connector, it looked as like one of the connections wasn't making a good contact with the blade in the fan connector.
I cleaned off the harness and the fan plugs, and it works a little better now, still at times won't work.
I plan to show the dealer this, as the recall was done a few months ago.
Note, cleaning the plug on the fan is a pain, as it's so hard to reach.
