Contour Enthusiasts Group Archives Forums General Troubleshooting Problem with shifting into first not at a dead stop

Print Thread

Re: Problem with shifting into first not at a dead stop #45567 09/25/01 05:06 PM
Joined: Sep 2001 Posts: 15 cleveland, oh M Micro216 Junior Member
Micro216 Junior Member M Joined: Sep 2001 Posts: 15 cleveland, oh	make sure your clutch fluid is full and you may need to bleed your clutch to make sure there is no air in the line. also, you may want to check your trans oil to make sure its not low or burnt. most manual trans the only way to do it is to drain all the oil and replace. i am not sure if it ever needs replaced, refer to your owners manual.

Entire Thread
Subject	Posted By	Posted
Problem with shifting into first not at a dead stop	Eric.S	09/25/01 04:37 AM
Re: Problem with shifting into first not at a dead stop	JSmith	09/25/01 05:19 AM
Re: Problem with shifting into first not at a dead stop	dave	09/25/01 02:40 PM
Re: Problem with shifting into first not at a dead stop	PA 3L SVT	09/25/01 03:17 PM
Re: Problem with shifting into first not at a dead stop	Viss1	09/25/01 04:40 PM
Re: Problem with shifting into first not at a dead stop	Micro216	09/25/01 05:06 PM
Re: Problem with shifting into first not at a dead stop	Italiano	09/25/01 06:50 PM
Re: Problem with shifting into first not at a dead stop	TheyCallMeSteel	09/25/01 11:33 PM
Re: Problem with shifting into first not at a dead stop	Eric.S	09/26/01 09:58 PM
Re: Problem with shifting into first not at a dead stop	hmouta	09/27/01 04:08 AM
Re: Problem with shifting into first not at a dead stop	Terry Haines	09/27/01 12:53 PM

Link Copied to Clipboard