I'm really open to discussing anything with any engine builders here on CEG. The fact is the heads will work with any shortblock 2.5/3.0/3.5. All we'll be doing is opening up the ports on the heads and doing valve work, at least that's the initial task though we may at the time be equiped and ready to also do valvetrain work like springs ect.ect..
I really need to talk to Terry H. about all this, get some opinions from him + I hope that both of us can arrange a buildup program, even BNOON. This modification to the Heads will work for either N/A or Forced Induction. This mod alone on a well equiped motor can net up to a real 30 horsepower. Like I mention this should bump most well modded 2.5's right into the 200+hp@wheels range, though this is just speculation, if our calculations are correct this should be about right.
I need "again", 5 Serious Contour/Cougar Owners to get this program started. This will be another turning point for the Duratec Program, at least for street vehicles.If you're interested plz email me or post here. I'd love to see this up and rolling before the end of this year. ONce we have a program set for our heads, we can CNC Duratec Heads anytime, and on a regular basis single or as a group.
People I'm looking for: Those running Forced Induction, those that have reached, or near the threshold of 2.5 N/A performance and those with 3liter conversions.
