I took my 00 SVT in today along with my letter from Ford. They want to use the repair kit on my car. The repair kits are on order and should be in next week. The tech. showed me the repair manual for the kits so all I have seen are pictures of the parts, This is what it contains and the procedure for the repair.1.Remove fasteners that attach the dash and slide the dash back about 3 inch's. 2.Apply a piece of black moulding to the dash along the edge that is at the base of the windsheild then push the dash back in place. 3.Remove the defroster moulding and they have 2 metal brackets that will mount down in the defroster vents and is supposed to hold the dash down somehow. Next they have some new metal clips that mont to the dash down in the recessed area that the black defroster moulding fits in, those clips now will retain the defroster moulding so it does'nt pop back up. 4.Now this is the part I really like. Now they remove the bezel that surrounds the gauge area,then drill holes through the dash about 3/4 of an inch apart all the way around the gauge opening then install pop rivets in the holes. Now they replace the gauge bezel and WHA-LA you now have a NEW? dash. eek mad I'm going to have to wait and see how this turns out before they touch mine! I'm completely PISSED!!!! mad mad mad mad