Contour Enthusiasts Group Archives Forums Branches South Central JaTo

Hey are you around? Wanna go to the track Friday? HPT? Let me know.

Sorry I couldn't go, but I did have a blast driving back my SVT (new BAT kit installed) from Rick's place. WOOOHOOO! My Contour finally handles like it should!

Track-wise, the SVT is out until I get a new transmission/clutch installed. I've been having a bit of clutch slip as of late, and 2nd/3rd shifts are getting pretty notchy and cranky (I'm thinking syncro).

Now, the Vette is another matter altogether...

Let me know some times you guys are going and I'll try to mesh my schedule up. I'm usually booked weekends until Jan due to trips/work/hunting, but pound on me and I'll probably manage to make a couple of showings.

BTW, does anyone know a REALLY good suspension shop for getting 4-wheel alignments done here in KC? I need to get one done here ASAP, so any ideas would be greatly appreciated.

Ohh, I was hoping to see the vette out!

Here is some info:
99 C5 Auto Catback/Xpipe/intake kit/Lab top tune 13.48@105mph

Buddies 96 Grand Sport Vette
13.5 @105

Me
2000 Z28 Auto
13.914 @102.18

Every one had traction issue at HPT. Even Nitto equiped car were only getting 2.01 60ft's I was High 2.1@2.2

Check out www.fast4doors.com for my post under general.
Also you can look for the Kansas F-body and check out times there. There was a Z06 with 600 miles that was running mid/low 13's...

I don't really know off the top of my head. Robby does your brothers shop do that??? Or have a direction for JaTo?