Originally posted by Brex:
Anyone know the final stage of O2 sensor falure before vechicle is rendered complete usless untill repaired?


As far as I know, you can still run your car without an operational O2 sensor. As mentioned above, it will probably have bad gas mileage and some driveability problems, but it should still run.

Originally posted by Brex:
I apparently need mine replaced and they supposedly have little heaters in them which makes oem 02's a whopping $250 a peice (in canada).


You should be able to find OEM O2s for a lot less online.

Originally posted by Brex:
They need to be replaced in pairs and aftermarket O2's don't have the heater nor a decent wire harness.


As was mentioned above, I have never heard of having to replace O2 sensors in pairs. You might want to do it for preventative maintenance, but I don't see why you would have to.


96 Contour SE Duratec V6 24-valve 2.5L ATX 108,000 mi. Replaced: crankshaft w/ DMD, EGR valve (clogged), EVR, DPFE, PCV valve, evap emissions hose & tube (cracked), window regulator (broken), LH & RH PCV tubes, UIM gasket (leak), ignition coil