I still don't fully understand the problem. Do the lights on the other doors work at all? If so, do the other door lights go on and off together? Please give a little more detail to your problem.

If the bulbs are burnt out, then you will need to take the door panels off in order to replace the bulbs. It could be that the lights are not pushed into the housing fully (you will need to take the door panels off for this as well). If it is a wiring issue, then there will probably be another solution.

Either way, you will need to give more info on the problem.


96 Contour SE Duratec V6 24-valve 2.5L ATX 108,000 mi. Replaced: crankshaft w/ DMD, EGR valve (clogged), EVR, DPFE, PCV valve, evap emissions hose & tube (cracked), window regulator (broken), LH & RH PCV tubes, UIM gasket (leak), ignition coil