Ok.. another update.. and some more pics!
I agree with 'TheGreatOne' the C/FSVT bolts are the same. With the shims you'll need to make up about 0.105" of length. I measured the stock bolts, they measured 1.635" or 41.5mm. The 0.105" added we'd need a bolt about 1.740" (44.2mm) There is a pic of this gap..(pics 100-0039/40)
Another note.. the shims i measured of 0.115" might an additional 0.010". I measured 0.115" of space on the outside of bracket and 0.130" on the inside of the bracket. (pics 100-0034/35) It should make the gap of 0.130" -> 0.120" and the 0.115" -> 0.125" But i could be nit picking... It's pretty much centered. I just wanted more clearance on the outside of the bracket. This is because of the little extra 'nub' on the outside of the bracket. (pic mvc-12f)
I'm waiting for the SS brake lines to come in so i can test if they fit on the FSVT calipers. If they do i'll install everything and have more pics up.
