|
Joined: Nov 2001
Posts: 65
Member
|
Member
Joined: Nov 2001
Posts: 65 |
my turbo kit in a focus 2946lbs with driver just ran a 13.1 @ 110 mph and dot tires,,and that was with a 2.346 60 foot
still looking for contour to put my kit on
tom
|
|
|
|
Joined: Apr 2001
Posts: 620
Member
|
Member
Joined: Apr 2001
Posts: 620 |
1turbo where are you? I'm contemplating buying a Zetec (selling the 96 Duratec). I plan on blowing the SVT but it would be sweet to own a blown Zetec too. I'm in California.
SVT EMBLEM MOD HERE :::96:C:LX:::Black 2.5L ATX "my beater" - Shaved ? badgeless ? SE rocker panels :::99:SVT:C::: #2566 of 2760 T-RED/TAN "the bitçh" Brullen Cat-back w/ 3.5" angle-cut tips ? BAT European Suspension ? AFE Filter ? CnL 73mm MAF ? Diablosport Chip :MNQ3: ? Mirko front spilter ? Apexi SAFC (i'm scared to install! anyone in Norcal wanna help me?) ..::nyceboicreations.com::.. email:junkmail@nyceboicreations.com
|
|
|
|
Joined: May 2000
Posts: 4,042
Moderator
|
Moderator
Joined: May 2000
Posts: 4,042 |
Originally posted by Seawulf: My fastest time before the turbo was 16.995. My fastest time after the turbo was around 16.2.
On the dyno my car pulled 144 whp and 156 lb of tq with the turbo. My exhaust is 2 1/2" with no cat and quad monza tips. I usually do between 5 to 6 psi by 2800 rpm.
I don't know how much contours weigh but, my car weighs around 3000 lbs with me and half a tank of gas. Man, w/ you pushing that as much power as you are, I'd hope you could pull a quicker time than a 16.2.... You've got what, 170hp and 156tq, pretty much exactly what a Contour SE has... Most of the stock SEs run mid-higher 15s, and they weigh more than 3,000lbs w/ the driver... Trap speeds? John
'98 SVT - modded -15.01@91.8 '95 Suzuki GS500E -faster than the above ---wanting a Speed Triple or Superhawk badly
|
|
|
|
Joined: Mar 2002
Posts: 153
Member
|
Member
Joined: Mar 2002
Posts: 153 |
Originally posted by Jugs: Originally posted by Seawulf: [b]My fastest time before the turbo was 16.995. My fastest time after the turbo was around 16.2.
On the dyno my car pulled 144 whp and 156 lb of tq with the turbo. My exhaust is 2 1/2" with no cat and quad monza tips. I usually do between 5 to 6 psi by 2800 rpm.
I don't know how much contours weigh but, my car weighs around 3000 lbs with me and half a tank of gas. Man, w/ you pushing that as much power as you are, I'd hope you could pull a quicker time than a 16.2....
You've got what, 170hp and 156tq, pretty much exactly what a Contour SE has... Most of the stock SEs run mid-higher 15s, and they weigh more than 3,000lbs w/ the driver...
Trap speeds?
John[/b]My SE with 154 hp / 156 tq, only managed 16.0 at 86 mph (yes I suck). His time seems reaonable to me. However, if I paid for a turbo setup that got me less power than a very mildly modded duratec I be pretty p|ssed off.
97 SE MTX, KKM, UR UDP, 19# Injectors, SVT TB, SVT UIM, SVT Flywheel, Grizzly Street Clutch, Upgraded motor mounts, mystifed precats, brand new main cat, SVT exhaust sans resonator, 205-55-15 Dunlop SP5000's 154hp / 156 tq before the SVT exhaust, SVT dual honed upper and swapping the mystery main cat for mystery precats. My Profile
|
|
|
|
Joined: Nov 2001
Posts: 65
Member
|
Member
Joined: Nov 2001
Posts: 65 |
nyceboi i am located 12 miles I-85 S of Charlotte NC.
and we are still looking for a contour to turbo
tom
|
|
|
|
Joined: Jun 2002
Posts: 60
Member
|
Member
Joined: Jun 2002
Posts: 60 |
Originally posted by ScottK97SEMTX: My SE with 154 hp / 156 tq, only managed 16.0 at 86 mph (yes I suck). His time seems reaonable to me. However, if I paid for a turbo setup that got me less power than a very mildly modded duratec I be pretty p|ssed off. god, i agree with you wholeheartedly. but then again, he is only pushing 6 PSI of boost. with enough fuel ad good inition, i dont see why that car couldnt take 4 PSI more. <------------- wont turbo his contour!
1985 SVO: 4 cylinders, 5 gears, 20 PSI 1998 torredor red SVT contour: #3705 of 6535 need info on your SVTs service/recall/warranty history? e mail me...
|
|
|
|
Joined: May 2001
Posts: 86
Member
|
Member
Joined: May 2001
Posts: 86 |
1turbofocus, what do you need besides the contour to start that project? i.e.- money, help, materials? what is holding you guys back from getting a tour and turboing it?
99' black svt #646 of 2760 born: 12-7-98
mods: kkm intake, mystery mod, bassani exhuast, sho shop pulleys, bosch +4, magnecor wires, superchip(sitting in my glove box), h & r springs, ebc gas-slotted rotors, luks super white bulbs(head lights), removed orange reflectors, removed ding guards, pre 98 sail panels, fog light fix, th fix i'm 1/3 of the CSVT's in my family
|
|
|
|
Joined: Nov 2001
Posts: 65
Member
|
Member
Joined: Nov 2001
Posts: 65 |
still looking for some one wanting to turbo there contour zetec and is close to Charlotte NC
my zetec is now up to 325HP AND 328TQ at the wheels
tom
|
|
|
|
|