zetecracing i dont know who mark is but he needs to get out and tune some of these zetec engines or any engine for that matter we hit 100% duty cycle on the mustangs with 10 to 12 psi vortec also
we do not use the cheesy fmu we do this with the stock fuel psi like it should be done
ohsigmachi who said you have to run 18psi so you have 70.000 miles on your car so only run 10psi or 8 or 4 that is up to you and how you set your regulator
wonj yes i am running 100oct i feel like it is needed to run anything over 13psi just to be safe
after i do 1 or 2 contours on my dyno to make sure they are the same as the focus as for controling the fuel and timing i can send the chip out with the turbo kits
as for terrys kits if his kits are 2600.00 he should bring them out i think there is a market for them,his kits are half the price so there has to be a nother reason why he is not doing them other then mine
other turbo kits for the zetec
F-MAX we are going to test this kit in about 2 weeks
GUDE 1800.00 + some type of fuel needed we have made chips for this kit on our dyno it made 208hp at the wheel with 10psi 42lbs INJECTORS WERE AT 87% check with mark and see what he sais about a nother one useing 100% of 42`s
both these kits should fit the contour and work very well
yes my kit is a lot of money but it is the best one out there so far its clean ,well thought out,and it works
tom
