Cables are on the way. I have made two so far (one for me and one sold), and two more on the way. Hopefully I will have a batch of chips in within the week. If so I will build as many as I can before I leave.
I haven't drawn up a wiring diagram yet, but I will be doing that soon. What exactly do you need?
Best place to position and wire the eManage is on the right side of the car, drill a hole through the metal just to the right of the blower motor into the area where the cabin air filter is, then drill through the firewall. This puts the cabling right next to the pcm harness and allows the emanage to be mounted either in/behind the glove box. I put mine in the glove box for hidden yet easy access for tuning.
Ignition control is just a short time away, don't hold me to a day though. This is going to be the engine management computer of choice for Ford 6/4cyl owners within a few months, whether NA,blown, or Nitrous injected.
warmonger
