Alright guys, got a little problem with a 65mm throttle body that I just picked up. Sparks up in Jacksonville had an extra lying around, so I took it off his hands
. He modded it slighty different though, he used the fulcrum off the SVT tb, and retrofitted it to the 65mm. My problem(aside from the fact that the tb will nearly close itself without throttle stop modification)is that now I have some nasty throttle hang! When I first start the car it revs to 3k, then settles down to 1,250, and stays there, but as soon as I touch the throttle it's back up to 3,000. While cruising thru the gears the engine doesn't derev
, and will actually cruise on it's own(like cruise control)at around 1,950-2k. The car really screams with the new tb, and didn't require that much additional fuel with the S-AFC(1% from 5k-7.5k). So if you guys have any ideas on what I should do I would greatly appreciate it. Throttle hang fix? I did check and throttle plate does close all the way, but there is a slight(hair)space between the plate perimiter and tb housing. Thanks guys.
