How easy/hard was it to remove the backplate? I assume yours is plastic...did it seem brittle...would you think it could be restored safely? Do you have any way to see if yours is leaning out at heavy loading/WOT?
Thanks...Ed
Ed, I just want to remind you that when I pulled my backplate off I did not have the high rpm 'leaning out' problem. That only happened when I pulled the whole centerpost out. The Centerpost in does something to the amount of air flowing through the tube even though the backing plate is off. You should be ok if you leave the centerpost in. Then get the Greddy or APEX SAFC and tune the B*itch in so that you can see some real torque increases.
warmonger
You can call me anything you like as long as it's nice.(all lies accepted) 99 Silver Frost SVT. #226 of 2760 Engine: 3.0 power! Unique Stuff: Sunroof control module (#1 of 9) Car Audio: Loaded and loud! Check them out at http://home.earthlink.net/~twilson1726
