Quote:
Originally posted by tcobra98:
Quote:
Originally posted by SVeeT:
[b]
Milan is a pretty slick track. I wonder if Lapeer Dragway is better?
Damn, are you talking about the Lapeer, a.k.a "sand box". I wouldn't even waste your time at Lapeer. Half of the times, the track is covered with sand and the timing system doesn't work the other half of the times. You will be better off going to either Ubly or Norwalk which are around 1-1/2 hours away from detroit.

Since you went to Milan, you need to talk to svt2000(marc) regarding to how to launch at that track. He does have a contour that ran 14s at milan and he did pull 2.1 60' there. If I remember correctly, his front tire pressure is at 25 psi and rear is at 40 psi. He typically launches between 3-3.5k by slipping the clutch(not recommanded since he blew his clutch assembly out the last time at milan). Hope this helps.[/b]
It is very possible to get 2.1 60 ft times. I have a few in my pocket. Milan is a very tricky track to run at. When I run there, I run drag radials with about 22psi and the rears have about 40-42 psi. My launches are going to be different this year, only because I destroyed my clutch on opening day a Milan. But I will be going back soon, to get some 14`s slips.

SVeet- next time you wanna go to Milan, let me know. I will be more than happy to meet you down there. As for our times, looks like no traction for you. On opening day, I was running the same times as you. Just needed to get some rubber. But I am impressed by your mph. Keep up the work.

Marc

14.72@ 92.6 mph
www.modularV8.com

"CLUTCH KILLER" and also recently known as the DRIVETRAIN KILLER