As you guys probably know, I traded in mean green last weekend on a 2000 lazer red GT mustang with 9500 miles on it. It is bone stock, except I removed the intake silencer on it and I had mobil 1 synthetic oil put in it today. I really like it and look forward to modifying it over time.
I dynoed my mustang today to get some baseline numbers on it with NO MODS. It did pretty well. Anyway, I know that there are guys building up the 3.0's to have some serious HP, so I thought I'd post up my bone stock baseline dyno numbers for you guys to use as a performance benchmark to relate your buildups to. This way, you'll know when you're outpowering a stock 2000 2 valve stang. Hope this helps serve as a reference point as you guys get wild with the contour buildups.
The dyno was a Dynojet 248H.
MAX HP: 225 RWHP @ 5200 RPM (equates to 264 crank hp)
MAX TORQUE: 264 FT/LBS @ 4200 RPM (equates to 310 ft/lbs at the crank) 
