Originally posted by L8 Apexing Aussie:
To do this you would have to remove the TB from the intake manifold, unscrew the butterly and slide the plate out, remove the TPS and then give the whole thing one more turn in the tightening direction (clockwise), then reassemble. Can you elaborate further Aussie? I'll be taking the upper off in a month or 2 and if this'll help tip-in response I'll do it. Where is the TPS? Also, what am I giving 1 more turn to? Thx
Black 98.5 SVT w/ KKM intake, 73mm MAF, ASP pulley, Optimized stock Y-Pipe, 24mm hollow rear sway bar, Magnaflow resonator, Magnaflow mufflers, Roush springs, KYB struts
| 
