My loops bent and pulled out twice. I could see that the bracket on the frame was bending also, so I bought some heavy-duty aftermarket brackets. I cut 1/8" x 1-1/2" steel bar to make new mounting plates. I drilled a hole in the plate and used the stock bolt to hold the plate in the right spot, then had it welded to the frame and the old bracket. I drilled a hole in the end of the plate where the slot is in the stock bracket and used a bolt/nut to hold that end of the new loop. No problems in the 4 months since. BTW, the marine grease works great to stop poly bushing squeaks.
