It helps to loosen the subframe mounting bolts to get some clearance. Just a couple turns on the front ones and whatever is needed at the back. Be sure to support the subframe. I took a 13mm open end wrench to a grinder to make it smaller and thinner to do the job. It's still a pain in the ***. HTH
96LX/24V/ATX/Midnight Red/A4 repeaters/SVT exhaust/KKM/65mm throttlebody/SVTsprings and ST200 struts/SE rockers and BAT spoiler/BAT 19mm swaybar/urethane bushings/Kenwood 7 speaker syst./E1 SVT brakes w Powerslot rotors/9005 lowbeams/885 fogs/50% tint/Michelin XM+S 130's for winter/E1's with gForces for summer...and now "New Paint!!"
87 Renault GTA convertible/2.0l/mtx/Sony sound/otherwise stock
http://members.shaw.ca/neilmc/