Originally posted by 98SVT100:
Do you have any pictures of the blue?
Very nice job on the coating!
We only had the red samples, 3 and 4 hole as blue would have to be done in another session.
If you look at how we attached the stock hoses to the BAT pipe, it will be the same as with our pipe. One difference being the IAC hose. Because we placed our holes vertically, the stock hose, witout the plastic end fitting, will slide over our IAC hose fitting. The IAT will fit by using a small silicone grommet fitted over the IAT sensor. I fitted mine last night and it was snug, but is well into the air stream.
