well i spent about an hour and a half today recontenting the clock in my svt. for the connection on the clock, i used two usb-motherboard, connectors. they fit over the prongs perfectly. i used the cat 5 cable for the rest of the wiring. a note though, in the faq it says to use the red wire connectors to splice into your factory stereo harness. don't use them if you are using the cat 5 cable. the red connectors are too big and will not make a good connection with the cat 5 stranded wires, cause they're so small. i simply used a butt connector and wrapped it in electrical tape.
in any event, the clock works great! show's time even when the car is off. then when you turn on the ignition it lights up. good stuff.
