Originally posted by Andy W.:
UM JACK STANDS!!!!
They aren't that expensive, hell I'm sure someone had a couple spare sets laying around!
-Andy
We were going to try to use jackstands but they were not tall enough. The pic does no justice so show how high the car is. jackstands up front might have worked but the psi that jackstands put on the body of the car worried me so we leveled the foot print out more with long and wide blocks. In the back we may have been able to use them but if the front was slightly lower or higher would have shot the jacks out from underneath the car. With the blocks being under the tires it can pivot up and down with out loosing its foot hold. I need a lift!
