Contour Enthusiasts Group Archives Forums General Pics and Videos PICS - new glovebox MOD and pics of AMPS and 15's in the trunk ... must See!

OK, I'm posting 5 new pics from my latest system update in my Tour. Here is the latest pics. First of all is the new glovebox mod. Now I know that you have all heard of it, but I had to do it to make it so that my Image Dynamic Compression horns would fit in the stock glovebox location and underneath the sterring column for optimum sound quality.
THen we have a pic of the trunk and batteries, there are 4 Optima Yellow tops, 2 on each side of my box that contains 4 - Kicker 15 L7's. And here is a look at the new amp rack on the inside. On each side is an Earthquake D2 and in the middle is an Alumapro 15 Farad Cap. And to close it out I also mounted several of my smaller amps, a Memphis 150ST and a memphis 3004 in the back of my seats in the rear, here is a closer look. Thats all the pics I have for you today folks. I haven't yet gotten a new db rating from my new setup but I'm hoping for a 155 + showing when I get it rated in a couple of weeks. And for all you IASCA and db drag people, I would love to get more into the competitions for both SQL and SPL ... I have seen that several people pn this board are trophy winners at the finals and all, and I am very insterested in possibly getting in touch with a couple of ya'll to talk about forming an SVT Contour Audio Team or something. Anybody got any ideas? email to jared@dialupusa.net.

you...don't...have an airbag...and you replaced it with cologne! Impressive otherwise...

Creative! I'll give you that. I just hope on "illegal" substances make their way into your car.

Lets see a pic of the horn on the driver's side! Otherwise a very nice system.

OK, here is the horn on the drivers side. Ask and you shall receive. Behind the grill ... if you couldn't tell. With the super loud volume and staging on the horns however, it sounds crystal clear and perfect. SQL champ all the way baby!

Where did you get the carbon fiber for all the trim pieces?

Hey SVTweater.. How hard were those metal pedals to install.. did they have brackets behind them to clamp on to the pedal or.. do they screw in..

Can I ask how much u paid for those?.. I've seen them in a shop I was looking for pedals..!

This is how I have my Image Dynamics mini-horns installed:
http://photos.yahoo.com/bc/hpick666/vwp?.dir=/car+pics&.src=ph&.dnm=drivers+side.jpg&.view=t&.done=http%3a//photos.yahoo.com/bc/hpick666/lst%3f%26.dir=/car%2bpics%26.src=ph%26.view =t
http://photos.yahoo.com/bc/hpick666/vwp?.dir=/car+pics&.src=ph&.dnm=passenger+side.jpg&.view=t&.done=http%3a//photos.yahoo.com/bc/hpick666/lst%3f%26.dir=/car%2bpics%26.src=ph%26.vi ew=t

Underneath are The IDQ 6.2

Pollo_loco69 - I think it was from exoticwooddash.com. That sounds right, it is simply some carbon fiber pieces that go on using 3m tape of the backside of it. Pretty cool looking and about $200 if I remember correctly. You could always do a search for it in the archives. Jared.

Guntaker - I get the pedals at my local rice shop and paid $20 cash out the door I think. I didn't want to deal with the clamps and stuff so I just drilled a couple of screws right threw them and into the stock pedals, because they have holes already in them, and they fit just perfect. I have had them for about 6 months or so and have had no problems. Jared.