*LOL*.. the "SVT Snow Plow" mod! :p I did have to turn down a few contracts for the neighbors's driveways.
Plastique_synthetiX: As much as I would like to mold that thing in, I need to take it off for winter and road trips. It's an "all show, no go" item... No cornering sideways at full tilt with that spoiler 1.5 inches away from the pavement...
For the people who think they have bad roads, feel free to swing by Montreal, Quebec next time you're up in the "boonies" and I'll show you what bad is
... -40 deg in winter, freezing rain, 100 deg humid summer, cheap asphalt and 53' tractor trailers make for a bumpy commute. Trust me, my car has the scars to prove it.
I-Dom-In-8: Middle grille is stock, removed the Ford logo and honed the mounting plate to have an empty oval. Big no-no for the clear bulbs in the corners, up in Montreal this is one of the ricier things you can do to your car... They're staying orange.
-Mark: They supply brackets for the bottom that bolt up to the 3 holes for the splash guard under the front of the car. The back corners bolt up to the stock bumper brackets (near the wheelwell). I had to use some double-sided tape on the outer trailing edges cuz they were not sitting flush... I'd say it's a 15 minute job to remove the thing and roll the tape off the car. 25 minutes to re-tape, bolt up and apply into place. Jacking the car up is mandatory at my ride height...
The paint color variance is simply because the car was dirty in this pic, and the spoiler was spankin' clean... I'll post more soon now that I've washed the whole thing
