Hell no! If that's a 4-wire plug on a "metal housing", then it sounds like you're describing your mass air sensor. Don't screw with that! If you have an SVT, the IAT sensor is located on the accordian hose. Actually, if you have a non-SVT w/ the KKM, then it should be relocated to the hose anyways, so look there. The sensor is a two-wire setup, and you can splice the resistor inline with either wire (resistance is resistance).
\'94 Cobra #4963/5009, black on black, not quite stock
Formerly owned a black '00 SVT, #1972
Join the SVTOA!
RIP - Ray "Old Fart Emeritus" McNairy
