Technically it isn't a "motor mount", it's a tranny mount, the front tranny mount is the one in question and yes you can order one from various sources: FPO, SPMotorsparts, or your local Ford dealer; as it is a stock replacement item for an SVT. You will need to do one of the following things to make it work for your pre-98: If you get the new, lighter, shinier aluminum mount knock out the studs(hammer, bang it on concrete, ect..) and drill out the holes, or if you get the older, heavier, black cast iron mount(like i did :rolleyes: ) you can drill out the holes in the subframe slightly. The problem is that the bolts are a little closer together on the upgraded mount, and yes the ES inserts slip right in....and I'm spent!
