Originally posted by nigelstu:
I too have the ground control/koni set up... but i had some problems putting them on this past weekend. Is there a step that the haynes manual fails to tell it readers? I couldnt get the old strut off the knuckle... any help here would be greatly appreciated...
Lotsa pry-bar work involved... Make sure you split that knuckle nice and wide. On my car we removed the ball joint for the steering at the front, then hammered the hub down away from the strut to loosen it up.... At the back we removed the control arms & sway bar to help the hub drop down lower. A sturdy pry-bar is a must in any case ;), my friend Jeff was hanging from it under the car at a point (we were on a lift...)
