....I thought the B&m shifter kit works only on 98+ models. If it can work on my 95 MTX. I'll definately get one(I too suffer from the same disease).
....Anyways, for bang for the buck basic performance upgrade. You can start with a simple air filter or complete CAI depending on your budget. I recommend an open end filter such as AKIMOTO or anything similar. I have the MONSTER FLO filter that uses a breathable thick foam and a mesh-lke covering allowing optional flow and doesn't require a cleaning kit like K&N.You can use WD40 to clean out the foam/mesh filter, squeeze dry & re-install.( Just keep in mind that if you use the more free-flow covering you decrease the filtering efficiency) Next is to get rid of your stock piping and go your muffler shop to fabricate a CAT-BACK exhaust and muffler with 2.25 to 2.5" pipng, depending on how loud you want to go. Another upgrade are your spark plug wires. Your entry set are the MAGNECOR wires @ about something about $90 the most....probably you can get them much less. A step higher are the Nology wires & last are the Direct Hits which I have & they are GREAT!!!. CHIPS are good to, but you HAVE TO USE A HIGHER OCTANE GAS for optimal performance....GOOD LUCK with your upgrades and welcome!!!!!
