Well I was going to wait until I got it done but oh well. Yes I am in the process of getting a header on my car. I got tired of all the topics debating if it would work or not. They are the Kamikaze header from
www.zxtuner.com/store and are for the ZX2. Well they fit. The bolts match up and it fits nicely into the engine bay, BUT there has to be modification. First the stock o2 sensor sits on top of the manifold. The one on the header is on the passenger side. This would not be a problem except that the A/C compressor gets in the way. The o2 sensor has to be tapped into the opposite side. (there is plenty of space and wire on the o2 sensor) Also the hole for the original o2 sensor has to be plugged. Second the downpipe is not really shaped the same way the stock exhaust is. It is also too long. It runs into the flex pipe. Also it eliminates the cat so for the people that have to be emmissions friendly
the cat has to be relocated. (have to take it up the exhaust shop, got a high flow) I will have updates on the modifying the header (hopefully later today) and the downpipe issue. I will post pics as soon as I am done, hopefully this weekend.
This is definitely not a project for the faint hearted. You're thoughts and comments please.
