Redhawk,
for the trim on the top dash, remove 2 screws from inside the gauge cluster inside the 2 deep grooves inside that plastic piece, remove 2 other screws from behind the dash clock or the plastic piece that has contour on it , and you will have another screw or 2 behind the defroster switch.
now, the trim pieces on the lower side, fot the left one you will need to remove the lower left panel first above the knees. and under it there will be screws that you will have to remove and then pull that little black piece a bit hard.
for the right one, I don't recall perfectly, but I remember having to pull it hard with care to snap it out of place. just hold it tightly from inside the radio opening and pull, might help to lubricate with some oil before pulling out.. by sparying the edges from inside. just make sure you remove all visible screws. Good luck.
So what are you diing with your tour?
