just to keep every one informed i got a chance to see the flop tube today what it basically is, a braided line similar that can be found for brakes or oil lines for coolers. this line is used (assuming) both because its very felxable, long lasting and can with stand oils corrosive properties (also would not collapse as easily). at the end of the line there is a large brass nut. that weighs it down (again assuming)that brass is used because it softer less likely to damage anything (aka scrape). plus if needed we could probably round the corners for even more protection
still looking into if this would work for our cars hope this helps
ps if you got pics or anything else send it to relentless1214@hotmail.com
