my dad and i are going to get a flop tube and see if we cant work something out...
right now its just an idea but what would really help is does anyone have pictures of the pan/bottom end of the duratec this would let us see the motor and were the pickup is. the one bonus to this is that when the pan is down to install the flop tube you can incorperate the new windage design that way were taking out two problems at one time and cost should really be minimal sonsidering...around 100 dollars (and a few hours of your time) all in all we will see what we can come up with
also i dont know how well it will do with the 0 degree wheather but the flop tube will be of the same size (probable larger) then the standard pickup tube plus 0w-30 stays pretty thin even at lower temps
also if oil airation is the problem a larger pan might be worse in the long run (more oil means more movement in the pan into the moving components even worse airation then already present)
