I think what would look cool and I still have yet to try it is to get a metal plate with places for the toggle switches and dimmer pot cut out. Take the original plate that the switch came in, and cut it so that it seperates into two halves letting the toggle switch come out. If you are more adventurous, you can unsolder and resolder the toggle switch, but either way will work... there is no real way to easily remove the switch from the original plate without cutting or unsoldering. I do not recommend cutting the actual harness as it is a pain to strip the wires, etc. Anyways, the new plate would have two halves in which the bottom half housed the dimmer pot and half of the toggle... this way you create a big enough hole for the switch to pass through, and then put the top half of the plate on and snap the toggle into place. Hard to explain and understand, I know but once I get my stuff in and get the plate made, I will try and post pics if anyone is interested. However, it may be a month or who knows how long before I see my HVAC.... sent in pre-payment on the 10th but didnt make it to the list
and about 6 different posts later saying I prepaid Dom, and how I paid, etc. I am still seeing new posts asking for people who prepaid but arent on the list.... I am waiting to hear back from Brad.... have furnished ref. numbers but still no response. Don't mean to sound rude or inconsiderate, but I am just really frustrated... especially since I am one of the people (not the only one mind you) who helped to organize this, and now it's like I'm forgotten about. Ok, I'm done venting. Sorry.
