Terry - is the drop really only 20mm. I am not driving an ST200, I'm in a SVT. From what I am reading in the earier portion of the thread, The drop will be the drop of an ST200 (SVT height-SVT) + 20MM. That will make the total drop more than 20mm, right? or is an SVT the same drop as a ST200?
I think everyone would be happy with a 20mm drop on an SVT, but 1.6-1.8" seems really low if it's not adjustable height.
P.S. - would there be any reason why the GC sleeves would not fit the Koni (or Koni branded) springs? I would be interested if I could match the two together. Probably would void what little of a warranty each comes with. :rolleyes:
Have you put in your $0.02 to save contour.org?? Put in what you can spare to keep the site up. Check the General Forum.
~~~~~~
David
* 2k Black SVT on 17" Konig/Yokohama
* MB Quart all around; Alpine 7995, DEI/Alpine amps; Dynomat
Soon to come:
19" HRE 445s under GC/Koni Setup, Custom passive-AWD kit, 2 small Sequential Turbos running low boost, Sequential 6-speed, Widebody Kit, custom black-red chameleon paint; on and on...
| 
