SCHWINNG :rolleyes:

Thanks to all who paid, even if it was at the last minute.

And especially thanks to Terry for being the middle man for us on this.

Now, one last set of questions:

The backing plates that come with the bar, are these still being broken under hard use if only bolted on? If so the backing plates should be welded on, right? Are the included p[lates able to be welded in, or should I buy the plates that Aussie (Anastazzi) is selling to be welded in?

And finally, my end links are shot, (the bushings/washers actually.) Should I buy the end links from Performance Fords or wait for the adjustable links mentioned many months ago during the first Aussie bar group buy? Will the adjustables be available by the time the bars ship?

Thanks again Terry,
Dave

98.5 SE/sport/MTX
Brembo rotors w/KVR front and Mintex A/F rear
Pro-Flow 75mm MAF w/KKM filter-Nice!
Mobil 1/K&N oil
ES MM inserts waiting-I can't get the bolt loose...need a bigger breaker bar:(
Aussie Bar and Euro ST200 struts soon!
Major mods to stereo system
Clarion 9255
All Phoenix Gold processors/MPS amps!
Vifa/Adire drivers