Originally posted by SF-SVT:
I went though this several months ago..
The rears are the SB1010S, not a problem..
The Front.. (this was a little fiasco)
i thought they were the SB1010.. but i have an E1 SVT so i guess the bleed screws are different??.. It turned out to be the SB8125LL. (after 3 exchanges with SB's)
Some reason they were 8mm x 1.25 and not the 10 x 1.0 The stock bleed screws that came out measured 35mm in lengh so the SB8125(L) or the (LL) should work.. the L are 32mm and the LL are like 38mm. I got the longer ones.
Make sure you look carefully, and if possible take it out and measure it.
Hope this helps Are you serious?! SH!T they are sending me SB1010 for the front. God damn it! And I have that stupid snapped bleeder in the front!
Regards, Anastazi Father of the Aussie Bar anastazi.sarigiannis@aam.com"Computer games don't affect kids. I mean if Pacman affected us as kids, we'd all run around in a darkened room, munching pills and listening to repetitive music." ----------------------------------- 2000 Silver Frost SVT #1126 of 2150 8" AFE/"Big-Mouth" Intake, Modified BAT Pipe, IAT Mod - A'PEXi S-AFC, Superchip, No Secondaries, Cobra/CSVT Hybrid MAF, Magnaflow True Duals, MYSTERY Mod, Autolite AWSF22FS's and FMS Wires, ES MM Inserts, Cross Drilled/Slotted Rotors w/ Greenstuffs, APR DTM Spoiler, Escort Cossie Vents, NACA Duct, Mirko Splitter, Koni's & H&R Springs, 24mm "Aussie" Sway Bar, 18" Enkei RS-5, 225/40R18 KDW-2's. Pioneer DEH-P7000R, TS-6975's, TS-6855's, MTX BE104, MTX Blue Thunder PRO502 http://www.geocities.com/qikslvrsvt
| 
