I went though this several months ago..
The rears are the SB1010S, not a problem..
The Front.. (this was a little fiasco)
i thought they were the SB1010.. but i have an E1 SVT so i guess the bleed screws are different??.. It turned out to be the SB8125LL. (after 3 exchanges with SB's)
Some reason they were 8mm x 1.25 and not the 10 x 1.0 The stock bleed screws that came out measured 35mm in lengh so the SB8125(L) or the (LL) should work.. the L are 32mm and the LL are like 38mm. I got the longer ones.
Make sure you look carefully, and if possible take it out and measure it.
Hope this helps
