If I can get my car fixed by then I'll definitly be attending! TH said it sounds like my rear mount is shot and the front may be on its way out too because of it. mad

UPDATE: Felt a little better today so I jacked it up today and squirmed under there to check the rear mount...no cracked bracket, no broken bolts, the only thing I noticed out of the ordinary is that the bolt running through the rubber inside the round housing is sitting about 3/4 down and not straight through the middle. The rubber below the bolt has a few rips in it and the round holes are squished and have an oval look to them which I don't remember seeing in matts mount when I looked at it. I used a prybar to lift the engine and theres A LOT of play in the rubber(The bolt is seated firmly in the rubber but the entire rubber insert moves about 2 inches upward inside the metal housing under my strength laying on my back with the bar so I guess the 160 ft/lbs of engine torque will make it rotate the 30 degrees you guys saw) so methinks thats it.

Originally posted by 99SESPORT:
First off, if somebody is grabbing your nuts, your gonna do everything you can to get him off...
And sitting there telling him politely

"Please let go of my nuts, sir?"