Contour Enthusiasts Group Archives Forums Branches Northeast Major NJ Project!!!

Ummm...well not exactly.

See...i moved here from PA and they dont have the thingy to hang the liscence plate on the front. Well, short of going to the home depot and getting a 15 foot drill or doing it the Tim Allen way and blow up my car eventually, anyone got some advice?

(Maybe I should just go to one of the meets and have one of you put it on for me so I dont hurt my little fingers) :rolleyes:

Mizman

Double sided tape or zip tied to your bottom grill.. I run w/o it and haven't had a problem.

this might be what you need
go to front bumper
http://www.trademotion.com/partlocator/index.cfm?action=selectTree&CatalogID=2&sit eid=213671

no workie....

djpedro has a ticket and a court date hanging because he doesn't have his plate on his front bumper. mount it in your lower grill between the fogs, that should be ok.

Hey Mizman,

Quick question, what did the service guys tell you about the front license plate bracket? Were they able to help?

Let me know?

Dave

check this out http://www.teammiata.com/TM305.htm

I don't know if anyone on here got one or not.you might be able to make it work.

They told me that they need to screw holes and that there was no other way to do it safely. I guess I'll do that. Dont most states use both anyway?

Time to conform.....

Mizman

Thanks. This looks like a good idea. I have to see if there is enough space on our bumper for it to fold back like that....

It's already cost me a couple hundred bucks as well. I'm going to zip tie it to my lower front geille, towards the passenger fog so as not to block air flow to the radiator..and...cause I got a hold there anyway