Contour Enthusiasts Group Archives Forums Branches South Central Eric L

hey that moose fix that we did on Saturday. well it threw a CEL. i was hoping that was it. i thought the Vortech might had done some damage to something. i took the piece out and the CEL went away. no moose fix for me.

Oh well

Throw it away, like I said they literally only cost $.25

yeah. it worked great but the shifts sucked and the CEL wasn't fun. but thanks for helping me out.

Then I suggest getting these parts. Did the trick for me.

http://www.contour.org/FAQ/FAQ.cgi?s=probs&display=moose

Yeah Sam,
I did the TSB and it cured the moose for me also. After I installed the KKM, moose was so loud I couldn't hear my stereo! Did the TSB and alls quiet.

If the TH/Moose fix caused a MIL, that just means your hole in the plug is to small. Drill it out the next size bigger until the idle stabilizes and a balance is met.

yeah the one Erci gave me first seemed to have done the trick a bit better than the second one which had a smaller hole. kind of afraid to use it now. i will do some testing this weekend.

I just had to drill mine again this week when we hit lower temps in the single digits. I think I'm at 7/32's hole now. It was stubling at throttle tip in and searching a bit for the idle, now with the new hole she runs right again... still no moose mating calls.